For over 20 years, Chapel Hill, NC has known that Comfort First is the company to call for expert heating and air conditioning repair services.
Our Chapel Hill, NC reviews show how we hold your heating, cooling and home comfort above all else! See what your neighbors are saying about our HVAC services below.
Local Reviews
for Chapel Hill, NC
Powered by Nearby NowOur Reviews by City
Great service
Sam - Chapel Hill, NC
I thought the AC install is a two day project but they completed in less than a day and Joshua does know what he was doing. I’m impressed with the service
Did an excellent job!
Jay - Chapel Hill, NC
Excellent. He was prompt, worked hard, explained what he was doing. Appears very knowledgeable and experienced. Highly recommended.
Professional
Clint - Chapel Hill, NC
Easy to deal with, very personable and professional.
Tony was courteous, carefully diagnosis the problem and fixed quickly.
Hua - Chapel Hill, NC
Great service
Stephen - Chapel Hill, NC
Happy 😃
Fantastic service and explanation of work done
Jason - Chapel Hill, NC
Fantastic service and explanation of work done
Excellent service
Jay - Chapel Hill, NC
They worked with AHS warranty which is not great for them but delivered excellent service Appreciate their assistance and was professional and careful during COVID times.
Great
Wallace - Chapel Hill, NC
My experience with Joel Worshama and team from Comfort first Heating and Cooling (Sanford) was fantastic, perfectly fixed with professional ism and manerism, excellent Job
Great service
O. - Chapel Hill, NC
Comfort First came on behalf of American Home Shield to resolve a problem with the ac and took care of it fast. The tech was very courteous and right on time.
Fall Service
Patricia - Chapel Hill, NC
Tony checked out all 3 of our units. Found problem with new system. Reported it already, parts on order. Our 2 older systems are ok. Thank you Tony.
Tony M.
Armstrong furnace heating maintenance
Tony M.
Lennox furnace heating maintenance
Manuel M.
Complete 2 Systems worked in DS Payne Gas Furnace: HO stated they had an outage last week ever since ds system stoped working. Found blown out 3 amp fuse. Searched for short. Found shorted out tstat. Replaced it. Used a ProSelect prog tstat from truck stock. Replaced 3 amp fuse. Cycled system. System is running great at this time.
Manuel M.
Complete 2 Systems 2 Heating Tune Ups. US Carrier HP Split System: Checked tstst and air filter.. Checked heat strips and made sure they were on. Checked blower motor amp draws and run cap. Inspected evap coil. Reccomended a Secondary float switch to HO. Checked all wiring at the AH. Checked compressor and cfm amp draws. Checked dual cap. Dual cap is weak. Needs to be replaced. Checked all wiring at the condenser. Checked pressures. Tested defrost board. condenser coil is clean. System is running great st this time. HO said before calling her home warranty she wanst to know her options towards a new system. Sent Beth Lead sheet. AH is located in the attic. Easily accessible, left to right air flow. Duct is in good condition. Spoke to HO about the 10 year P&L. DS Carrier HP Split System: Checked tstst and air filter. Found bad tstat. System is coming on, and it showes auxilary heat is on but tstat is not sending 24v to relay for heat strips to come on. Tstst needs to be repl
Manuel M.
Complete 1 System 2 Zones Goodman Gas Furnace: replaced limit switch on left side of blower cage. Cycled system. System is running great at this time.
Manuel M.
Incomplete 1 System Trane Gas Pak: HO stated system was not coming on. Found roll out ceramic safety switch open. Checked heat exchanger, found it cracked. Roll out ceramic safety switch and heat exchanger needs to be replaced. HO stated he is not interested on knowing his options towards a new system. Called D&L. D&L in Raleigh never answere the phone. Had to call Fayeteville store. But parts are to be picked up at the raleigh store. Heat Exchanger P#: EXC1378. Price: $450.49 In Stock Roll out switch P#: FUS0620. Price: $4.44 In Stock. PO#: 77651. Ready for pick up in Raleigh.
Tony M.
Heating maintenance
Tony M.
Heating maintenance
Manuel M.
Complete 2 System worked on both Systems. Main Unit 2 Zones, 1rst and 2nd Floor. Lennox 90% Gas Furnace: EPA Heating Maintenance: Checked tstat and air filter. Checked electrical connections. Checked blower motor amp draws. No CO detected. Burners are clean. Cleaned flame sensor. Checked all pressures hoses. Checked amparage on draft motor. All safety switches are on great condition. System is running great at this time. 3rd Floor Fijutsi Mini Split EPA Heating Maintenance: checked blower motor. Inspected evap coil. Checked air filter. Checked compressor amp draw and cfm. Checked pressures. Condenser is clean. System is running great st this time.
Manuel M.
Complete 2 Systems worked on DS Trane Straight A/C: HO stated tstat went blank. Found Condensate pump gfi tripped. Reset it. Pump is working properly. Also found service door to furnace not installed correctly. Door was not making contact with power switch with on furnace. Checked pressures. System is running great st this time.
Manuel M.
Complete 1 System Goodman Gas Pak. EPA Heating Maintenance: cycled system. Checked tstat and air filter. Checked electrical connections. Checked blower motor and run cap. Found weak run cap. Reading 6.2 out of 10 uf. Replaced it authorized by HO. Charged her Level 1 + tax. System still under the 10 year parts warranty. Inspected evap coil. No CO detected. Burners are clean. Cleaned Flame sensor. Checked amparage on draft motor. All safety switches are on great condition. Checked draft motor. System is running great at this time.
Tony M.
Trane ac. Low charge
Tony M.
Goodman furnaces maintenance
Nathan T.
Lennox gas furnace bad zone board
Manuel M.
Complete 1 System Trane HO Split System. HO stated pvc pipe (1 1/2”) slipped out after I left. More likely hose coming from boiler which goes into same drain ad the hvac, pushed it drain down reason why drain slipped out. Added a strap to get more support to drain. Added more pvc pipe to drain (1 1/2”) and a coupling. Used primer and glue to get pvc secured. Checked again to make sure drain was clear. System is running great at this time.
Manuel M.
Complete 1 System Trane HO Split System. HO stated pvc pipe (1 1/2”) slipped out after I left. More likely hose coming from boiler which goes into same drain ad the hvac, pushed it drain down reason why drain slipped out. Added a strap to get more support to drain. Added more pvc pipe to drain (1 1/2”) and a coupling. Used primer and glue to get pvc secured. Checked again to make sure drain was clear. System is running great at this time.
Manuel M.
Complete 2 Systems worked on US Payne Straight A/C: replaced case coil. Recovered ref. To remove ductwork and case coil took us more time than usual due them having a bunch of screws and probably a 1/4 inch layer of mastic that was hard as cement. Removed old coil. Installed new case coil. Had to repipe copper lines and drain line. Leak tested system. Pulled vacuum. Added 7 lbs of 410A.
Manuel M.
Incomplete 2 Systems worked on US Payne Straight A/C: HO stated system was not cooling. Found system low in ref. 3rd time. Performed a leak search. Found leak at the evap. Coil. System holds 7 lbs of 410. 3 ton Up Air Flow Payne Case Coil. Case coil dimensions: 17.5Width x 17Height x 17.5Depth. Will need to order case coil from East Coast. Didnt order due time being after 5.
Carl T.
Trane A/C and gas furnace checked system found very dirty air filter causing duct work to make noice qhen system comes on
Manuel M.
Complete 3 Systems worked on DS Trane Straight A/C: HO stated system was not cooling. Found drain line stopped up. Float switch at the secondary drain plug was cutting system off due to main drain plug being stopped up. Replaced p trap and clear line. Tested condensate pump. Checked pressures. System is running great at this time
